Description

Key Details

Brand: 326POWER
Manufacturer: 326POWER Japan
Product: BuriWIDE Over Fender S14 Silvia S15 Face Front & Rear Set
SKU: BuriWIDEFenderS14
Category: Aero
Subcategory: Fenders
Product Type: Front & Rear Wide Fender Set
Compatible Vehicle: Nissan Silvia S14 with S15 Front-Face Conversion
Lineup: BuriWIDE
Front Width Increase: Approximately +45 mm compared with OEM
Rear Width Increase: Approximately +55 mm compared with OEM
Front Arch Raise: Approximately +10 mm
Rear Arch Raise: Approximately +20 mm
Front Fender Type: Factory replacement type
Rear Fender Type: Cover / overlay type
Front Fender Construction: 2-piece configuration with bumper-side attachment included
Factory Bumper Compatibility: Yes
Factory Side Step Compatibility: Yes
Fitment Concept: Dedicated S14 / S15-face conversion design
Finish: Unpainted white gel coat finish
Installation Requirement: Test fitting, alignment adjustment, preparation, and painting required
Common Use: S15-face S14 conversions, wide-body builds, stance cars, drift vehicles, lowered street cars, show cars, and aggressive Silvia projects

Common Applications
The 326POWER BuriWIDE Front & Rear Fender Set is suitable for Nissan Silvia S14 owners who have converted or are converting the vehicle to an S15 front face and want a dedicated wide-fender solution rather than adapting standard S14 panels. The approximately 45 mm wider front, 55 mm wider rear, 10 mm raised front arches, and 20 mm raised rear arches make the setup particularly suitable for stance, drift, out-lip, wide-wheel, and show-oriented builds. Final wheel fitment depends on wheel width, offset, tire size, suspension geometry, camber, ride height, and vehicle condition. If you are unsure whether this BuriWIDE Fender Set is suitable for your S14 Silvia with S15 face conversion, please contact us before ordering.  Contact us.

326POWER BuriWIDE Character
BuriWIDE inherits the styling direction of 326POWER's NEO PROJECT STANCE BUILD concept. The series combines substantial additional body width with raised wheel arches to support very low ride heights and aggressive out-lip wheel positioning while maintaining a coordinated wide-body profile around the vehicle.

Dedicated S14 with S15 Face Design
This BuriWIDE version was developed specifically for an S14 Silvia fitted with an S15 front face. 326POWER explains that conventional conversions previously required additional modification around the front-fender area, whereas this dedicated version was designed so that the S15-face configuration can be fitted without that conversion-specific fender modification.

Front Fender – Approximately 45mm Wider
The Front Fenders increase front-body width by approximately 45 mm compared with the factory reference width. They use a factory-replacement design rather than simply covering the original front fenders, giving the S15-face S14 additional wheel coverage while integrating with the converted front end.

Front Arch Raised Approximately 10mm
The front wheel arches are raised approximately 10 mm. This differs from the standard S14 Zenki and Kouki BuriWIDE versions, which use approximately 20 mm front arch raises. The S15-face version therefore has its own dedicated front-fender geometry.

2-Piece Front Fender Construction
The Front Fenders use a 2-piece configuration, and the smaller bumper-side attachments are included with the Front & Rear Set. 326POWER also offers the bumper-side attachment separately if a replacement is required.

Rear Fender – Approximately 55mm Wider
The Rear Fenders widen the S14 rear body by approximately 55 mm compared with the factory rear quarter-panel area. This larger rear width complements the approximately 45 mm front setup and creates the staggered wide-body proportions intended for the BuriWIDE configuration.

Rear Arch Raised Approximately 20mm
The rear wheel arches are raised approximately 20 mm. Combined with the approximately 55 mm additional rear width, this creates significantly more visual space around aggressive wheel and tire setups and supports very low ride-height styling.

Cover-Type Rear Fender Design
The Rear Fenders use a cover / overlay-type construction rather than replacing the complete factory rear quarter panel. The original body remains underneath the overfender, and any additional body modification required for wheel or suspension clearance should be evaluated according to the actual vehicle setup.

Factory Bumper Compatibility
326POWER confirms that the BuriWIDE S14 S15-face fenders can be installed with factory bumpers. The dedicated front setup also includes the bumper-side attachments required for the wider front-fender configuration.

Factory Side Step Compatibility
Both the Front and Rear Fenders are confirmed compatible with the factory side steps. This allows the BuriWIDE wide-body conversion to be incorporated without requiring a dedicated side-step component.

Wheel and Suspension Planning
The increased fender width and raised arch positions provide considerably more freedom for aggressive wheel placement, but they do not guarantee compatibility with a specific wheel size or offset. Wheel width, offset, tire dimensions, camber, suspension travel, steering clearance, inner clearance, and ride height should all be planned together before the final setup is selected.

Installation and Fitment Notes
The Front and Rear Fenders must be test fitted to the actual vehicle before painting. S15-face conversion alignment, hood and headlight transitions, bumper and side-step transitions, front bumper attachments, rear overlay positioning, left-to-right alignment, mounting locations, panel gaps, wheel clearance, and overall body fitment should all be checked before final preparation. 326POWER requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.

Conversion Modification Notes
326POWER specifically states that this dedicated S14-with-S15-face version eliminates the additional modification that was previously required when adapting wide fenders to this conversion. This should not be interpreted as meaning that no fitting work of any kind is necessary; the manufacturer still requires test fitting, alignment, and vehicle-specific adjustment before painting.

Rear-Body Modification Notes
The Rear Fenders are cover-type. The official information does not specifically state that the original rear quarter panels must be cut. Any cutting or permanent body modification required for wheel and suspension clearance should therefore be determined according to the actual vehicle, wheel setup, and intended suspension travel.

Aero Product Notes
The complete fender set is supplied unpainted in a white gel coat finish, and installation and painting are not included. The Front and Rear Fenders should be inspected, test fitted, aligned, prepared, and painted only after final vehicle fitment has been established.

Demo Image Notes
This listing is for the BuriWIDE S14 Silvia with S15 Face Front & Rear Fender Set only. Demo vehicles may show 3D☆STAR body-kit components, General Purpose Lip Type 1, rear wing, wheels, suspension components, and other exterior modifications that are not included unless specifically stated otherwise.

Shipping and Lead Time
Availability may vary depending on supplier and production status.
Additional shipping fees may apply depending on destination.
International delivery timing may vary by country, customs clearance, and carrier.

Note: Shipping price listed on website is only for USA customers. For other country, please contact us individually after placing an order. We will revise the shipping quotation.

Important Notes
This is an authentic 326POWER Japan BuriWIDE Front & Rear Fender Set developed specifically for an S14 Silvia with S15 front-face conversion. It provides approximately +45 mm front and +55 mm rear width with approximately +10 mm front and +20 mm rear arch raises. The front fenders are factory-replacement type with bumper-side attachments included, while the rear fenders are cover-type. The complete set is supplied unpainted in white gel coat finish and requires test fitting, preparation, and painting before installation.

FAQ

Is this an authentic 326POWER product?
Yes. This is an authentic 326POWER Japan BuriWIDE aero product.

What is the SKU?
The official 326 International SKU is BuriWIDEFenderS14.

What vehicle is this Fender Set designed for?
It is specifically designed for a Nissan Silvia S14 fitted with an S15 front-face conversion.

Is this for a normal S14 Zenki?
No. 326POWER offers a separate BuriWIDE set for the standard S14 Zenki / pre-facelift body.

Is this for a normal S14 Kouki?
No. A separate BuriWIDE set is available for the standard S14 Kouki / late-model body.

Is this for an S15 Silvia chassis?
No. This product is for an S14 chassis with an S15 front-face conversion.

Does this listing include both Front and Rear Fenders?
Yes. This is the complete Front & Rear BuriWIDE set.

How much wider are the Front Fenders?
The Front Fenders are approximately 45 mm wider.

How much wider are the Rear Fenders?
The Rear Fenders are approximately 55 mm wider.

How much are the front arches raised?
The front arches are raised approximately 10 mm.

How much are the rear arches raised?
The rear arches are raised approximately 20 mm.

Why is the front arch raise different from the normal S14 BuriWIDE versions?
The S15-face version uses dedicated front-fender geometry for the converted front end. The manufacturer specifies approximately 10 mm front arch raise for this version rather than the approximately 20 mm used on the standard S14 Zenki and Kouki BuriWIDE front fenders.

Are the Front Fenders factory-replacement type?
Yes. The Front Fenders are replacement-type panels.

Are the Rear Fenders replacement panels?
No. The Rear Fenders are cover / overlay type.

How many pieces are the Front Fenders?
The Front Fenders use a 2-piece construction.

Are the bumper-side attachments included?
Yes. The Front & Rear Set includes the smaller bumper-side attachments for the front fenders.

Can the bumper-side attachments be purchased separately?
Yes. 326POWER also lists the front attachment separately.

Can these fenders be used with factory bumpers?
Yes. 326POWER confirms compatibility with factory bumpers.

Can these fenders be used with factory side steps?
Yes. The manufacturer confirms compatibility with factory side steps.

Why is this version specifically made for an S15-face conversion?
Standard S14 wide-fender solutions previously required additional modification when used with an S15 face. 326POWER developed this dedicated version around the conversion so that the conversion-specific modification is no longer required.

Does “no modification required” mean absolutely no fitting work is necessary?
No. 326POWER still requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting. The statement refers specifically to the additional modification previously needed to adapt the fenders to the S15-face conversion.

Does this guarantee bolt-on fitment with every S15 conversion kit?
The product is designed as a bolt-on wide-fender solution for the S14/S15-face configuration, but actual vehicle alignment can vary depending on how the conversion was performed, previous bodywork, bumper choice, headlights, hood positioning, and mounting points. Test fitting is still required.

Does the set guarantee a particular wheel size or offset?
No. Final wheel fitment depends on wheel width, offset, tire size, camber, suspension geometry, steering clearance, ride height, and inner clearance.

Do the original rear quarter panels need to be cut?
The official product information does not specifically state that rear-quarter cutting is required. Any permanent body modification needed for wheel clearance should be determined according to the individual vehicle and intended setup.

What finish does the Fender Set come in?
It is supplied unpainted in a white gel coat finish.

Does it come painted?
No. Installation and painting are not included.

Does it need to be test fitted before painting?
Yes. 326POWER specifically requires test fitting, panel-gap adjustment, and vehicle-specific fitment correction before painting.

Can mounting-hole adjustment be required?
Yes. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.

Can demo images show additional products?
Yes. Demo vehicles may show 3D☆STAR body-kit components, General Purpose Lip Type 1, rear wings, wheels, suspension parts, and other modifications that are not included with this Fender Set.

Can these fenders be used on public roads?
326POWER states that the product was developed for shows and events and does not guarantee vehicle-inspection compatibility for public-road use.

Is professional installation recommended?
Yes. Professional bodywork, S15-face conversion alignment checking, test fitting, surface preparation, painting, and final installation are strongly recommended.