product name
Product Info
The 326POWER BuriWIDE Front & Rear Fender Set is an authentic 326POWER Japan wide-body aero package developed specifically for the Nissan Silvia S14 pre-facelift / Zenki. The complete setup widens the front by approximately 45 mm and the rear by approximately 55 mm while raising both front and rear wheel arches by approximately 20 mm, creating the aggressive low ride-height and out-lip styling associated with the BuriWIDE series.
Brand: 326POWER
Manufacturer: 326POWER Japan
Product: BuriWIDE Over Fenders for S14 Silvia Pre-Facelift Front & Rear Set
SKU: BuriWIDEFendersS14
Category: Aero
Subcategory: Fenders
Product Type: Front & Rear Wide Fender Set
Compatible Vehicle: Nissan Silvia S14 Pre-Facelift / Zenki
Lineup: BuriWIDE
Front Width Increase: Approximately +45 mm compared with OEM
Rear Width Increase: Approximately +55 mm compared with OEM
Front Arch Raise: Approximately +20 mm
Rear Arch Raise: Approximately +20 mm
Front Fender Type: Factory replacement type
Rear Fender Type: Cover / overlay type
Front Fender Construction: 2-piece configuration with bumper-side attachment included
Factory Bumper Compatibility: Yes
Factory Side Step Compatibility: Yes
Finish: Unpainted white gel coat finish
Installation Requirement: Test fitting, alignment adjustment, preparation, and painting required
Common Use: Wide-body builds, stance cars, drift vehicles, lowered street cars, show cars, and aggressive S14 Zenki projects
Common Applications
The 326POWER BuriWIDE Front & Rear Fender Set is suitable for Nissan Silvia S14 Zenki owners who want considerably more wheel coverage together with higher wheel-arch positioning for aggressive lowered setups. The approximately 45 mm wider front, 55 mm wider rear, and 20 mm raised arches at both ends make the package particularly suitable for stance, drift, out-lip, wide-wheel, and show-oriented builds. Final wheel fitment depends on wheel width, offset, tire size, suspension geometry, camber, ride height, and vehicle condition. If you are unsure whether this BuriWIDE Fender Set is suitable for your S14 Silvia Zenki, please contact us before ordering. Contact us.
326POWER BuriWIDE Character
BuriWIDE inherits the styling direction of 326POWER's NEO PROJECT STANCE BUILD concept. The range combines substantial additional body width with raised wheel arches to help create extremely low vehicle height and aggressive out-lip wheel positioning while maintaining a coordinated wide-body profile.
Front Fender – Approximately 45mm Wider
The BuriWIDE Front Fenders increase front-body width by approximately 45 mm compared with the factory S14 Zenki front fenders. They use a factory-replacement design rather than simply covering the original front panels, creating additional wheel clearance while maintaining integration with the surrounding factory bodywork.
Front Arch Raised Approximately 20mm
The front wheel openings are raised approximately 20 mm compared with the stock arch position. This raised-arch design supports the very low ride-height and aggressive out-lip styling that 326POWER developed the BuriWIDE series around.
2-Piece Front Fender Construction
The Front Fenders use a 2-piece configuration. 326POWER specifically states that the smaller bumper-side attachments are included with the front fenders and with the complete Front & Rear Set.
Rear Fender – Approximately 55mm Wider
The Rear Fenders increase rear-body width by approximately 55 mm compared with the factory quarter-panel area. The larger rear width complements the approximately 45 mm front setup and gives the S14 the staggered wide-body proportions intended by 326POWER.
Rear Arch Raised Approximately 20mm
The rear wheel arches are also raised approximately 20 mm from the factory position. Together with the additional 55 mm of rear width, this creates more visual space around aggressive wheel and tire setups and supports lowered stance configurations.
Cover-Type Rear Fender Design
The BuriWIDE Rear Fenders use a cover / overlay-type construction rather than replacing the complete factory rear quarter panel. The original body remains underneath the overfender, and any additional body modification required for wheel clearance should be evaluated according to the intended vehicle setup.
Factory Bumper Compatibility
326POWER confirms that the BuriWIDE S14 Zenki fenders can be installed with the factory bumpers. The front setup also includes the dedicated bumper-side attachments required for the wider fender configuration.
Factory Side Step Compatibility
The manufacturer also confirms compatibility with the factory side steps at both the front and rear fender transitions. This allows the BuriWIDE package to be installed without requiring a dedicated BuriWIDE side-step component.
Wheel and Suspension Planning
The increased fender width and raised arch positions provide significantly more freedom for aggressive wheel placement, but they do not guarantee compatibility with any particular wheel size. Wheel width, offset, tire dimensions, camber, suspension travel, steering clearance, inner clearance, and ride height should all be planned together before the final wheel setup is selected.
Installation and Fitment Notes
The Front and Rear Fenders must be test fitted to the actual vehicle before painting. Hood, door, bumper and side-step transitions, front bumper attachments, rear overlay positioning, left-to-right alignment, mounting locations, panel gaps, wheel clearance, and overall body fitment should all be checked before final preparation. 326POWER requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.
Rear-Body Modification Notes
The official S14 Zenki BuriWIDE information identifies the Rear Fenders as cover-type but does not explicitly state that the original rear quarter panels must be cut. Any cutting or permanent body modification required for wheel or suspension clearance should therefore be determined according to the actual vehicle setup rather than assumed from the product listing.
Aero Product Notes
The complete fender set is supplied unpainted in a white gel coat finish, and installation and painting are not included. The Front and Rear Fenders should be inspected, test fitted, aligned, prepared, and painted only after final vehicle fitment has been established.
Demo Image Notes
This listing is for the BuriWIDE S14 Silvia Zenki Front & Rear Fender Set only. 326POWER demo vehicles may show 3D☆STAR body-kit components, General Purpose Lip Type 2, Manriki Wing, LS3.26 body-kit components, wheels, suspension parts, and other exterior modifications that are not included unless specifically stated otherwise.
Shipping and Lead Time
Availability may vary depending on supplier and production status.
Additional shipping fees may apply depending on destination.
International delivery timing may vary by country, customs clearance, and carrier.
Note: Shipping price listed on website is only for USA customers. For other country, please contact us individually after placing an order. We will revise the shipping quotation.
Important Notes
This is an authentic 326POWER Japan BuriWIDE Front & Rear Fender Set for the Nissan Silvia S14 Zenki, providing approximately +45 mm front and +55 mm rear width with approximately 20 mm raised arches at both ends. The front fenders are factory-replacement type with bumper-side attachments included, while the rear fenders are cover-type. The complete set is supplied unpainted in white gel coat finish and requires test fitting, preparation, and painting before installation.
FAQ
Is this an authentic 326POWER product?
Yes. This is an authentic 326POWER Japan BuriWIDE aero product.
What is the SKU?
The official 326 International SKU is BuriWIDEFendersS14.
What vehicle is this Fender Set designed for?
It is designed specifically for the Nissan Silvia S14 pre-facelift / Zenki.
Does this listing include both Front and Rear Fenders?
Yes. This is the complete BuriWIDE Front & Rear Set.
How much wider are the Front Fenders?
The Front Fenders are approximately 45 mm wider than OEM.
How much wider are the Rear Fenders?
The Rear Fenders are approximately 55 mm wider than OEM.
Are the front wheel arches raised?
Yes. The front wheel arches are raised approximately 20 mm.
Are the rear wheel arches raised?
Yes. The rear wheel arches are also raised approximately 20 mm.
Why are the arches raised?
326POWER developed the approximately 20 mm raised arches to support very low ride-height and aggressive out-lip wheel setups.
Are the Front Fenders factory-replacement type?
Yes. The Front Fenders replace the factory front fenders.
Are the Rear Fenders replacement panels?
No. 326POWER describes the Rear Fenders as cover / overlay type.
How many pieces are the Front Fenders?
The Front Fenders use a 2-piece construction.
Are the bumper-side attachments included?
Yes. The complete Front & Rear Set includes the front bumper-side attachments.
Can the bumper-side attachments be purchased separately?
Yes. 326POWER also offers the front attachments separately.
Can these fenders be used with the factory bumpers?
Yes. 326POWER specifically confirms factory-bumper compatibility.
Can these fenders be used with the factory side steps?
Yes. 326POWER confirms compatibility with the factory side steps.
Is this the S14 Kouki / late-model version?
No. This listing is specifically for the S14 Silvia Zenki / pre-facelift.
Is this the S14 with S15-face conversion version?
No. 326POWER offers a separate BuriWIDE version specifically for S14 vehicles with an S15 front-face conversion.
Are individual Front Fenders available separately?
Yes. The approximately +45 mm Front Fenders are also sold separately.
Are individual Rear Fenders available separately?
Yes. The approximately +55 mm Rear Fenders are also available separately.
Does the set guarantee a specific wheel width or offset?
No. Final wheel fitment depends on wheel width, offset, tire size, camber, suspension geometry, steering clearance, ride height, and available inner clearance.
Do the original rear quarter panels need to be cut?
The official product information reviewed does not explicitly state that cutting is required. Any permanent body modification necessary for wheel clearance should be confirmed according to the individual vehicle and intended setup.
What finish does the Fender Set come in?
It is supplied unpainted in a white gel coat finish.
Does it come painted?
No. Installation and painting are not included.
Does it need to be test fitted before painting?
Yes. 326POWER specifically requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting.
Can mounting-hole adjustment be required?
Yes. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.
Can demo images show additional products?
Yes. Demo vehicles may show 3D☆STAR body-kit components, General Purpose Lip Type 2, Manriki Wing, LS3.26 aero components, wheels, suspension parts, and other modifications that are not included with this Fender Set.
Can these fenders be used on public roads?
326POWER states that the product was developed for shows and events and does not guarantee vehicle-inspection compatibility for public-road use.
Is professional installation recommended?
Yes. Professional bodywork, test fitting, alignment, surface preparation, painting, and final installation are strongly recommended for a complete wide-fender conversion.