Description

Key Details

Brand: 326POWER
Manufacturer: 326POWER Japan
Product: BuriWIDE Over Fender S15 Silvia Front & Rear Set
SKU: BuriWIDES15
Category: Aero
Subcategory: Fenders
Product Type: Front & Rear Wide Fender Set
Compatible Vehicle: Nissan Silvia S15
Lineup: BuriWIDE
Front Width Increase: Approximately +55 mm compared with OEM
Rear Width Increase: Approximately +65 mm compared with OEM
Front Arch Raise: Approximately +10 mm
Rear Arch Raise: Approximately +20 mm
Front Fender Type: Factory replacement type
Rear Fender Type: Cover / overlay type
Front Fender Construction: 2-piece configuration with bumper-side attachment included
Factory Bumper Compatibility: Yes
Factory Side Step Compatibility: Yes
Rear Body Modification: Trimming / cutting of excess rear bodywork required
Finish: Unpainted white gel coat finish per current 326 International listing
Installation Requirement: Test fitting, body modification, alignment adjustment, preparation, and painting required
Common Use: Wide-body builds, stance cars, drift vehicles, lowered street cars, show cars, demo vehicles, and aggressive S15 Silvia projects

Common Applications
The 326POWER BuriWIDE Front & Rear Fender Set is suitable for Nissan Silvia S15 owners who want significantly greater wheel coverage and higher wheel-arch positioning for extremely aggressive lowered setups. The approximately 55 mm wider front, 65 mm wider rear, 10 mm raised front arches, and 20 mm raised rear arches make the package particularly suitable for stance, drift, out-lip, wide-wheel, and show-oriented S15 builds. Final wheel fitment depends on wheel width, offset, tire size, suspension geometry, camber, ride height, inner clearance, and vehicle condition. If you are unsure whether this BuriWIDE Fender Set is suitable for your Nissan Silvia S15, please contact us before ordering.  Contact us.

326POWER BuriWIDE Character
BuriWIDE inherits the styling direction of 326POWER's NEO PROJECT STANCE BUILD concept. The series combines major increases in body width with raised wheel arches to help achieve very low ride heights and aggressive out-lip wheel positioning while maintaining a coordinated wide-body profile around the vehicle.

Front Fender – Approximately 55mm Wider
The Front Fenders increase front-body width by approximately 55 mm compared with the factory S15 fenders. They use a factory-replacement design rather than simply covering the original front panels, providing substantially more wheel coverage while integrating with the factory bumper and side-step areas.

Front Arch Raised Approximately 10mm
The front wheel openings are raised approximately 10 mm compared with the stock arch position. This design gives additional clearance around aggressive front wheel setups and supports the low ride-height appearance that defines the BuriWIDE concept.

2-Piece Front Fender Construction
The Front Fenders use a 2-piece configuration. 326POWER specifically states that the smaller bumper-side attachments are included with the front fenders and with the complete Front & Rear Set.

Front Bumper-Side Attachments Included
The smaller attachment pieces positioned around the front bumper side are included with this complete set. 326POWER also offers these attachments separately as replacement components if needed.

Rear Fender – Approximately 65mm Wider
The Rear Fenders increase rear-body width by approximately 65 mm compared with the factory rear quarter-panel area. The greater rear width complements the 55 mm front setup and gives the S15 the staggered wide-body proportions intended by 326POWER.

Rear Arch Raised Approximately 20mm
The rear wheel openings are raised approximately 20 mm compared with the factory position. Together with approximately 65 mm of additional rear width, this creates substantially more room around aggressive rear wheel setups and supports very low suspension configurations.

Cover-Type Rear Fender Design
The Rear Fenders use a cover / overlay-type design rather than replacing the complete factory rear quarter panels. The wider panel is fitted over the existing rear body area, with modification to the underlying body required as part of the installation.

Rear Fender Cutting Required
326POWER specifically states that the rear-fender area requires modification and that excess original body material must be cut. This is an important installation requirement for the S15 BuriWIDE rear setup and should be completed by an experienced body shop before final panel preparation and painting.

Factory Bumper Compatibility
326POWER confirms that both the front and rear BuriWIDE fenders can be installed with the factory bumpers. Final bumper-to-fender transitions should still be checked carefully during test fitting.

Factory Side Step Compatibility
The manufacturer also confirms compatibility with the factory side steps. This allows the BuriWIDE fenders to be installed without requiring a dedicated BuriWIDE side-step component.

Wheel and Suspension Planning
The substantial increase in body width and raised arch positions allow significantly more aggressive wheel placement, but the stated widths do not guarantee compatibility with a particular wheel size or offset. Wheel width, offset, tire dimensions, camber, suspension travel, steering clearance, inner clearance, and ride height should all be planned together before selecting the final setup.

Installation and Fitment Notes
The Front and Rear Fenders must be test fitted to the actual vehicle before painting. Hood, door, bumper and side-step transitions, front bumper attachments, rear overlay positioning, left-to-right alignment, mounting locations, panel gaps, wheel clearance, and overall body fitment should all be checked before final preparation. The rear body requires trimming/cutting of excess material. 326POWER requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.

Aero Product Notes
The current 326 International listing specifies that the complete fender set is supplied unpainted in a white gel coat finish, and installation and painting are not included. The Japanese manufacturer page notes that actual BuriWIDE products may be supplied in white or black gel coat depending on production. The fenders should be inspected, test fitted, modified where required, aligned, prepared, and painted only after final vehicle fitment has been established.

Demo Image Notes
This listing is for the BuriWIDE Nissan Silvia S15 Front & Rear Fender Set only. 326POWER demo vehicles may show LS3.26 or 3D☆STAR body-kit components, General Purpose Lip Type 1, Manriki Wing, wheels, suspension components, and other exterior modifications that are not included unless specifically stated otherwise.

Shipping and Lead Time
Availability may vary depending on supplier and production status.
Additional shipping fees may apply depending on destination.
International delivery timing may vary by country, customs clearance, and carrier.

Note: Shipping price listed on website is only for USA customers. For other country, please contact us individually after placing an order. We will revise the shipping quotation.

Important Notes
This is an authentic 326POWER Japan BuriWIDE Front & Rear Fender Set for the Nissan Silvia S15, providing approximately +55 mm front and +65 mm rear width with approximately +10 mm front and +20 mm rear arch raises. The front fenders are factory-replacement type with bumper-side attachments included, while the rear fenders are cover-type and require trimming/cutting of excess original rear bodywork. Test fitting, body modification, preparation, and painting are required before final installation.

FAQ

Is this an authentic 326POWER product?
Yes. This is an authentic 326POWER Japan BuriWIDE aero product.

What is the SKU?
The official 326 International SKU is BuriWIDES15.

What vehicle is this Fender Set designed for?
It is designed specifically for the Nissan Silvia S15.

Does this listing include both Front and Rear Fenders?
Yes. This is the complete BuriWIDE Front & Rear Set.

How much wider are the Front Fenders?
The Front Fenders are approximately 55 mm wider than OEM.

How much wider are the Rear Fenders?
The Rear Fenders are approximately 65 mm wider than OEM.

How much are the front wheel arches raised?
The front arches are raised approximately 10 mm.

How much are the rear wheel arches raised?
The rear arches are raised approximately 20 mm.

Why are the arches raised?
326POWER developed the raised arches to help achieve very low ride heights and aggressive out-lip wheel positioning.

Are the Front Fenders factory-replacement type?
Yes. The Front Fenders replace the factory front fenders.

Are the Rear Fenders replacement quarter panels?
No. The Rear Fenders are cover / overlay type.

How many pieces are the Front Fenders?
The Front Fenders use a 2-piece construction.

Are the bumper-side attachments included?
Yes. The smaller bumper-side attachments are included with the Front & Rear Set.

Can the front bumper-side attachments be purchased separately?
Yes. 326POWER also offers the attachment pieces separately.

Can these fenders be used with the factory front bumper?
Yes. 326POWER confirms factory-bumper compatibility.

Can these fenders be used with the factory rear bumper?
Yes. The rear BuriWIDE fenders are also confirmed compatible with the factory bumper.

Can these fenders be used with the factory side steps?
Yes. 326POWER confirms compatibility with the factory side steps.

Do the original rear quarter panels need modification?
Yes. 326POWER specifically states that the rear-fender area requires modification and that excess body material must be cut.

Why is rear-body cutting required?
The BuriWIDE rear fenders are approximately 65 mm wider and use a raised-arch overlay design. The underlying factory body must be modified to provide the required clearance for the wider and higher wheel-opening configuration.

Is professional bodywork recommended for the rear installation?
Yes. Because cutting of the original rear body is required, installation should be carried out by an experienced body shop familiar with wide-fender conversions.

Are the individual Front Fenders available separately?
Yes. The approximately +55 mm Front Fenders are available separately.

Are the individual Rear Fenders available separately?
Yes. The approximately +65 mm Rear Fenders are also sold separately.

Does this set guarantee a specific wheel size or offset?
No. Final wheel compatibility depends on wheel width, offset, tire size, camber, suspension geometry, steering clearance, inner clearance, and ride height.

What finish does the Fender Set come in?
The current 326 International listing specifies an unpainted white gel coat finish. The Japanese manufacturer page notes that actual BuriWIDE products may be supplied in white or black gel coat depending on production.

Does it come painted?
No. Installation and painting are not included.

Does it need to be test fitted before painting?
Yes. 326POWER specifically requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting.

Can mounting-hole adjustment be required?
Yes. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.

Can demo images show additional products?
Yes. Demo vehicles may show LS3.26 or 3D☆STAR body-kit components, General Purpose Lip Type 1, Manriki Wing, wheels, suspension parts, and other modifications that are not included with this Fender Set.

Can these fenders be used on public roads?
326POWER states that the product was developed for shows and events and does not guarantee vehicle-inspection compatibility for public-road use.

Is professional installation recommended?
Yes. Professional bodywork, rear-quarter trimming, test fitting, alignment, surface preparation, painting, and final installation are strongly recommended.