Description

Key Details

Brand: 326POWER
Manufacturer: 326POWER Japan
Product: NEO GT S15 Silvia Rear Over Fender
SKU: GTROFS15
Category: Aero
Subcategory: Fenders
Product Type: Rear Over Fender
Compatible Vehicle: Nissan Silvia S15
Width Increase: Approximately 55 mm wider than stock
Construction: One-piece design
Design Detail: Double-step air-intake styling
Lineup: NEO GT
Design Character: Wide-body, aggressive, racing-inspired, and high-impact
Finish: Unpainted white gel coat finish
Installation Requirement: Test fitting, alignment adjustment, preparation, and painting required
Common Use: Wide-body builds, drift cars, circuit-inspired vehicles, show cars, demo vehicles, and Japanese tuning-inspired S15 builds

Common Applications
The 326POWER NEO GT S15 Silvia Rear Over Fender is suitable for S15 owners who want a significantly wider and more dramatic rear profile together with distinctive NEO GT styling. The approximately 55 mm increase in width provides additional exterior space for aggressive wheel fitment, while the sculpted one-piece design gives the rear quarter area a much stronger visual presence. Final fitment depends on wheel width, offset, tire size, camber, suspension setup, ride height, body condition, and installation method. If you are unsure whether this Rear Over Fender is suitable for your S15 Silvia, please contact us before ordering.  Contact us.

326POWER NEO GT Character
NEO GT inherits the NEO PROJECT GT WIDE BODY concept and represents one of 326POWER's most aggressive exterior styling directions. The S15 NEO GT design emphasizes extreme body volume, a low and wide stance, and a strong racing-inspired presence, with approximately 65 mm additional front width and 55 mm additional rear width forming the foundation of the wide-body configuration.

Approximately 55mm Wider Rear Design
The NEO GT rear overfender increases the S15 rear-body width by approximately 55 mm compared with stock. The additional width creates a more substantial rear quarter profile and complements the approximately 65 mm wider NEO GT front fenders to produce the exaggerated wide-body proportions intended by the complete NEO GT design.

Double-Step Air Intake Design
One of the defining features of the NEO GT rear overfender is its double-step air-intake styling. 326POWER describes this detail as a major visual accent within the heavy and imposing rear design, helping the fender maintain a dynamic appearance when viewed from different angles.

One-Piece Fender Construction
The rear NEO GT overfender uses a one-piece structure. The single-piece design integrates the approximately 55 mm additional width and the double-step air-intake detail into one sculpted exterior component, helping create the distinctive rear profile of the NEO GT S15.

NEO GT Wide-Body Integration
The Rear Over Fender is designed to work within the wider NEO GT S15 styling concept, which also includes approximately 65 mm wider Front Over Fenders, a Front Bumper, Side Steps, and other NEO GT components. The official NEO GT lineup specifically notes that a dedicated rear bumper is not offered, making the rear overfender one of the key elements defining the rear appearance of the vehicle.

Wheel and Suspension Planning
The approximately 55 mm additional rear width provides more exterior space for aggressive wheel fitment, but final specifications should still be selected according to the individual S15. Wheel width, offset, tire dimensions, camber, suspension travel, ride height, and inner clearance can all affect final fitment. The official NEO GT product information does not specify one required wheel or tire configuration.

Installation and Fitment Notes
The Rear Over Fender must be test fitted to the actual vehicle before painting. Rear-quarter positioning, wheel-arch alignment, left-to-right symmetry, mounting locations, wheel clearance, and overall body gaps should all be checked before final preparation. 326POWER specifically requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.

Aero Product Notes
The product is supplied unpainted in a white gel coat finish, and installation and painting are not included. The official NEO GT listing does not state a raised-arch measurement for this rear overfender, so one should not be assumed. The fender should be inspected, test fitted, aligned, prepared, and painted only after final fitment has been established.

Demo Image Notes
This listing is for the NEO GT S15 Silvia Rear Over Fender. Demo vehicles may show the NEO GT Front Bumper, Side Steps, Front Over Fenders, wings, wheels, suspension components, or other modifications that are not included unless specifically stated otherwise. Product images are for illustrative purposes and may differ from the actual product.

Shipping and Lead Time
Availability may vary depending on supplier and production status.
Additional shipping fees may apply depending on destination.
International delivery timing may vary by country, customs clearance, and carrier.

Note: Shipping price listed on website is only for USA customers. For other country, please contact us individually after placing an order. We will revise the shipping quotation.

Important Notes
This is an authentic 326POWER Japan NEO GT rear overfender for the Nissan Silvia S15, providing approximately 55 mm additional rear width with a one-piece structure and distinctive double-step air-intake styling. It is supplied unpainted in white gel coat finish and requires test fitting, alignment adjustment, preparation, and painting before installation. No raised-arch measurement is stated in the official NEO GT product information.

FAQ

Is this an authentic 326POWER product?
Yes. This is an authentic 326POWER Japan NEO GT aero product.

What is the SKU?
The official 326 International SKU is GTROFS15.

What vehicle is this Rear Over Fender designed for?
It is designed for the Nissan Silvia S15.

How much wider is it than stock?
326POWER states that the rear overfender is approximately 55 mm wider than stock.

Is the rear fender a one-piece design?
Yes. 326POWER specifically describes the rear NEO GT overfender as a one-piece structure.

What is distinctive about the rear fender design?
It features a double-step air-intake design that adds a strong visual accent to the wide rear-quarter profile.

Does the rear fender have a raised arch?
The official NEO GT product information does not state a raised-arch measurement, so one should not be assumed.

What is NEO GT?
NEO GT is a 326POWER wide-body styling line that inherits the NEO PROJECT GT WIDE BODY concept and focuses on extreme body volume, aggressive styling, and a racing-inspired appearance.

How wide are the matching NEO GT front fenders?
The matching NEO GT front overfenders are approximately 65 mm wider than stock.

Does this listing include the front fenders?
No. This listing is specifically for the NEO GT rear overfender.

Does the NEO GT lineup have a dedicated rear bumper?
No. 326POWER specifically states that a rear bumper is not offered for the NEO GT S15 lineup.

Does this listing include the Front Bumper?
No. The NEO GT Front Bumper is a separate product.

Does this listing include the Side Steps?
No. The NEO GT Side Steps are separate products.

Can wider wheels be fitted with this overfender?
The approximately 55 mm additional exterior width provides more space for aggressive wheel fitment, but final compatibility depends on wheel width, offset, tire size, camber, suspension setup, ride height, and inner clearance.

Does 326POWER specify a required wheel size or offset?
No. The official product information does not specify one required wheel or tire configuration.

What finish does the Rear Over Fender come in?
It is supplied unpainted in a white gel coat finish.

Does it come painted?
No. Installation and painting are not included.

Does it need to be test fitted before painting?
Yes. 326POWER specifically requires test fitting, alignment adjustment, and vehicle-specific fitment correction before painting.

Can mounting-hole adjustment be required?
Yes. If mounting-hole positions are difficult to align, slight adjustment such as elongated-hole processing may be required during test fitting.

Can demo images show additional products?
Yes. Demo vehicles may feature other NEO GT aero components, wings, wheels, suspension parts, and other modifications that are not included with this Rear Over Fender.

Can this be used on public roads?
326POWER states that the product was developed for shows and events and does not guarantee vehicle-inspection compatibility for public-road use.

Is professional installation recommended?
Yes. Professional test fitting, alignment, body preparation, painting, and final installation are recommended for the best fit and finish.